During busy times large orders may not calculate shipping. Please contact us if checkout tells you we cannot ship. We can! Order collection now available from Penrith 9am-2pm Weekdays & 9am-12pm Saturday. Saturday collection is available for orders placed before 12pm Friday. *Delays may occur for International Shipping, due to limited plane departures*

$25.00

This brilliant 3 cavity lipstick mould is brilliant for the home crafter who wishes to create their own lipsticks. Please make sure your lipstick base is sufficiently cooled before pouring or it will leak.

12mm mould to fit 12.1mm tubes

To Use:
Grease the inside of the mould with an oily cloth
Place the two halves tightly together and secure with a rubber band
Pour the lipstick mix into the cavities while still quite liquid
When set enough to be moved transfer it to the fridge and leave it there at least 30 minutes.
Remove from fridge and gently separate the halves.
With a gloved hand, push the base gently to unmould it.
Use as is with a rounded tip, or cut to a point with a sharp knife if you prefer the pointed tip look.
Use a 12.1mm lipstick tube - roll the inner sleeve all the way to the top before securely inserting your completed lipstick.
Roll back down and push the over cap firmly in place.

Availability: 85 In Stock

This brilliant 3 cavity lipstick mould is brilliant for the home crafter who wishes to create their own lipsticks. Please make sure your lipstick base is sufficiently cooled before pouring or it will leak.

12mm mould to fit 12.1mm tubes

To Use:
Grease the inside of the mould with an oily cloth
Place the two halves tightly together and secure with a rubber band
Pour the lipstick mix into the cavities while still quite liquid
When set enough to be moved transfer it to the fridge and leave it there at least 30 minutes.
Remove from fridge and gently separate the halves.
With a gloved hand, push the base gently to unmould it.
Use as is with a rounded tip, or cut to a point with a sharp knife if you prefer the pointed tip look.
Use a 12.1mm lipstick tube - roll the inner sleeve all the way to the top before securely inserting your completed lipstick.
Roll back down and push the over cap firmly in place.

Lipstick Mould - 3 cavity

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page